19 items in this category
12V Cordless Hazardous Location Driver
Fastening torque range: 30-80 inch pounds. This brushless 12-volt 1/4" hex driver is UL listed for Class I, Division 2 (hazardous) locations for maximum 50° Celsius ambient. It features: no-load …
View DetailsBlind Riveter (Electric)
Installs 3/32 through 3/16 inch diameter (any rivet material), including CherryMax and CherryMax A; 1/4 inch diameter aluminum rivet capacity. 12V DC Cordless battery included. Installs bolts and rivets. Has …
View DetailsBlind Riveter (Electric)
Comes with the following components: Components: Adapter Sleeve (Flats), Adapter Puller Shaft, Adapter Sleeve Olympic Lok, Adapter Shaft Olympic Lok, (3) Nosepieces (5/32-3/16 CherryMax, 1/4 CherryMax, 1/4 Monobolt), 5/32 Maxibolt …
View DetailsBlind Riveter (Pneumatic)
Installs 1/8", 5/32" & 3/16" universal or countersunk head rivets. Operates at 90 to 120 psi of air pressure; 2 cu/ft per minute air consumption. With a 0.250 - 18 …
View DetailsCircular Saw (Gasoline)
Rescue saw commonly used for the purpose of removing personnel lodged in damaged aircraft and other emergency evacuation needs. Wheel speed 6,300 rpm maximum. Powered by air cooled, single cylinder, …
View DetailsDie Grinder (Fixed-Head)
Pneumatic dust free grinder sanding system. Includes 75 conditioning discs, 100 assorted coated abrasive discs, 10 Clean & Strip disc, whip assembly (lubricator / evaporator / filter), and oil bottle …
View DetailsDisk Sander
Right-angle air sander for medium- and heavy-duty sanding, deburring, blending, smoothing and brushing operations. No-load speed is 6,000 rpm. Sander has lever throttle and auxiliary side handle. 1/4" female NPT …
View DetailsDrill (Pneumatic)
Non-reversible drill has a 180° angle head, a body grip handle and a lever throttle. 3400 rpm no load speed, 1/4" NPT air inlet and a 1/4" chuck. This air …
View DetailsElectric Etcher
Type I - Light duty etcher, 500 Watts. Electric arc-type etcher operates on 120v AC for marking tools, jigs and dies. Etcher features stage selector switch, on/off power switch, 3 …
View DetailsElectric Etcher
Type II - Heavy-duty etcher, 1000 Watts. Electric arc-type etcher operates on 120v AC for marking tools, jigs and dies. Etcher features stage selector switch, on/off power switch, 3 foot …
View DetailsElectric Stapler
This electric stapler staples automatically when work is inserted! Staple 2-20 sheets of 20-lb. paper, header cards and more. "Hi-Low" switch for selecting stapling power and is fully adjustable depth …
View DetailsHydraulic Torque Wrench
IAW Pratt & Whitney Aircraft Group (United Technologies) Drawing PWA 50308 Rev. N.
View DetailsImpact Wrench (Electric)
Electric powered, portable, impact wrench loosens & tightens bolts & nuts. Has built in power regulator for control of power output. The wrench has a pistol grip handle & is …
View DetailsImpact Wrench (Pneumatic)
1" square drive for extra heavy duty, high volume, production work. Standard 1-1/4" inch bolt capacity. Working torque: 950 foot-pounds min. Maximum torque: 1,350 foot-pounds. Air inlet connection is 1/2" …
View DetailsNeedle Scaler (Pneumatic)
Heavy Duty Scaler has pistol-grip handle and button throttle. Under load 3,500 Impacts/Minute (IPM). Weighs 8-1/2 lbs. Grip type body, heavy duty. Remove paint, rust and scale from flat and …
View DetailsPulling Head
Installs universal & countersunk head rivets Cherry No. G750A, G747, G704B, G746A, G701A & G689 riveters. Pulling head is for use on pneumatic riveters to install rivets.
View DetailsRivet Head Shaver
Type 2: Single rotation shaver for soft metal rivets (aluminum, aluminum alloy, copper, brass and mild steel). These portable pneumatic shavers cleanly and precisely shave rivets without damaging surfaces. The …
View DetailsRotary Tool Kit (Flexible Shaft/Mount)
This Rotary Took Kit has 115 Volts AC or DC; No load Speed - 25,000 minimum; Full load Speed - 14,000 minimum. Additional components and spare parts supplied with electric …
View DetailsSheet Metal Cutters
Electromagnetic Interference Suppressed tool. (Only the basic tool prior to modification for EMI suppression is required to have proof certifying compliance with the applicable UL Standard.) Size 3 - Cuts …
View DetailsNeed a Quote?
Can't find what you're looking for? Our team can help source any NSN item in FSC 5130.
Request a Quote